It is pretty easy to update the Galaxy variant SM-J700P to J700PVP1AQD1 Android 6.0.1 Marshmallow. Many of you might not think that it a big deal, as it is not a very big update, but we can assure you that the update does consist of some fixes. Also, a regular update keep your phone safe as the security patch is also updated and has the ability to fight upcoming and more dangerous viruses.
Since J700PVP1AQD1 Android 6.0.1 Marshmallow is rolled out in stages and not at one time, therefore there is a high possibility that the update is yet not available in your region. If that is the case, then you surely can take full of this article. In this article, we are going to teach you how to download Marshmallow manually on your phone.
All you have to do is follow the steps below and by the end of this article, you will have the latest Stock Android Marshmallow 6.0.1 on your Samsung Galaxy J7. Using Odin marshmallow to update your Galaxy S7 will get you the desired update while keeping your phone’s warranty unbroken. Reason being, the process does not allow any root or custom recovery installation.
NOTE: An important thing to remember here is that this article is only for Galaxy J7 (SM-H700P), so kindly do not try it on any other variants of the phone. You can check the model number by going to Setting>About Phone.
Before you get down to the installation process, there are a number of things that you need download and install.
- It is imperative that you create a backup of your entire Data. There is a slight possibility that things go wrong, and you lose your data. So, to be on the safe side, we suggest you create a backup of your data.
- Then you need to download and install the USB drivers for your phone. In this case Galaxy S7 (SM-J700P). Also, ensure that these drivers are properly installed on your computer.
- The debugging mode of your phone should be enabled. You can do that by going to Setting>Developer Options.
- The phone should have a minimum battery life of 70 percent. Reason being, if your phone shutdowns during the process due to low battery, it might damage your device permanently.
You may also read: How to download USB Drivers of HTC U11 on your Mac and Windows
Step 1: Download both Odin and J700PVP1AQD1 Android on your computer.
Step 2: Now extract files to get tar.md5.file.
Step 3: Switch off your phone and turn it back on in the download mode. Press and hold the Power keys, along with Home and Volume Down Button together. When you see the Android logo on the screen, you should let go of the power button for a second and press it again to enter the desired mode.
Step 4: Launch Odin on your computer and then connect your phone to it via USB cable.
Step 5: Once your phone is successfully connected you will see an ID: COM box in ODIN turns yellow along with a port number.
Step 6: You need to select the md5 file and for that, you would have to click on AP folder.
Step 7: Before you start the installation process ensure that the Auto Reboot and F.Reset Time option are selected. Also, the re-partition option should be disabled.
Step 8: Once the process is completed, your phone will reboot. Once you see the home screen only then disconnect your phone from your PC.
You may also read: How to share your media library on Google Photos