You have bought your Samsung Galaxy S8, now it is time for you to root your phone to enjoy the full to its full potential. The rooting process of Samsung Galaxy S8 comes in the form of CF-Auto-Root. Odin is the main key here, it is used to flash the packages. Once you root your phone you get full access to any third-party packages as well as the roots apps. The tutorial below will provide you with a step by step guide on how to root XXU1AQCA Android 7.0 on Galaxy S8 Plus. It is imperative for you to ensure that your Galaxy S8 on XXU1AQCA Android 7.0 Nougat firmware.
It is said to be the safest root method available and it works perfectly well with the new S8 mobile. Due to the fact, that is not dependent on a single built, it has the ability to support Android 7.0 as well as many future firmware updates. It is basically a called the rooting for beginner’s software. It is used in combination of the stock Samsung firmware and the most effective and efficient way to do your first root.
You may also read: iPhone 8’s rumored specs and features
USB Drivers: It is imperative that you have downloaded and installed Samsung Galaxy S8 USB drivers on your laptop.
Backup: There is always a chance of things going the other way, so make sure that you have created a backup of all your data.
How to Root XXU1AQCA Android 7.0 on Galaxy S8 Plus G955F Nougat Firmware:
Below are the steps, you should first read them carefully and then get on with the rooting process. Before you start, make sure that you have everything listed under “To Remember” heading.
This tutorial is only for Samsung Galaxy S8 SM-G955F.
You have made a backup of your data.
You phone should not be on custom ROM, it should be on official firmware by Samsung.
Your phone should have XXU1AQCA Android 7.0 Nougat Firmware.
Step 1- To start with, you need to download CF-Auto-Root for your S8 Plus on your PC. The file will be a zip file, you need to extract it.
Note: Your flash counter is incremented when you use this root, to reset the counter you should run Triangle away once you are done rooting you S8. In case you are running a custom recovery or kernel, the flash counter will become one every time you boot your phone. You can reset the counter when you plan to go into warranty or you can configure Triangle away in a way that it resets the counter on with every reboot.
You may also read: Where to buy Galaxy S8 in the United States
Step 2- Download the Odin software for your smartphone.
Step 3- Turn off the phone and enter the download mode by pressing and holding the home button along with the volume down button. After that, you need to press the power button and wait till you see a Waring screen. To enter the Download mode, you need to press the volume up button again.
Step 4- Open Odin on your system and then connect your phone and your laptop using a USB cable.
Step 5- You will see the ID:COM box turn yellow along with a COM port number on the Odin interface. This will happen if your phone get connected successfully.
Step 6- To select the file that you extracted in Step 1, you need to click on PDA/AP and then choose the extracted file.
Step 7- If you haven’t already enabled the Auto Reboot and F-Reset times option in Odin, you need to do it now.
Step 8- Now click on start in Odin to instigate the rooting process. This might take a couple of minutes.
Step 9- After the procedure is completed, your phone is will automatically reboot itself in the recovery mode and it will flash the root package files. Then the ID:COM box will also change color. It will become green.
Step 10- Once you see the home screen, you need to disconnect your phone from the PC. Your phone is now rooted, you can have fun with it!Read all tutorials about Samsung Galaxy S8