Since the latest Android 7.1.2 N2G47W is out, we are assuming that you have already our updated your P6 to it. If you haven’t then click right here for an easy tutorial on How to update Nexus 6P to Android 7.1.2 N2G47W Nougat to Official Factory Image.
This means that even if you have rooted your phone previously, you have lost your rooted status. But you need not worry, below we have listed the detailed procedure on how to root your Nexus P6 on Android 7.1.2 N2G47W Nougat. Despite the fact that the update did not bring any changes, yet everyone is getting it because it did bring in the promised security update. So, let’s get started instead of wasting more time.
It is an important step for you to download the Huawei Nexus 6P latest USB drivers on your computer.
Since rooting your phone means that it will be wiped clean, so it is important that you make a backup of your data including your pictures, contacts, passwords, apps list etc.
You may also like: How to Root XXU1AQDD Android 7.0 on Galaxy S8 G950F Nougat Official Firmware
Instructions for rooting P6 on Android 7.1.2 N2G47W:
Please read all the steps below, before you start implementing the actual process.
Things to Remember:
1- The method that we have explained below is limited only to P6 having Android 7.1.2 N2G47W installed on it. Trying this method on other variants of the phone is not a good idea. We are not sure it might even work on them.
2- The bootloader of your phone should be unlocked.
3- The phone should have only the Android 7.1.2 N2G47W version on it.
Step 1- The first step requires you to download SDK for your android device. You can easily find that on the Android developer’s website. Install the software and set it up with the USB drivers package and the platform-tools present in the SDK.
Step 2- You should do this beforehand, enable the USB debugging mode on your smartphone.
Step 3- Download Fastboot in accord with your operating system and then you need to extract that in the SDK platform-tools directory. The exact path is as follows android-sdk-windows\platform-tools. In case there is no directory present there, we suggest that you make one.
If you haven’t downloaded the SuperSu x2.82 on your computer, now is the right time.
You may also read: How to fix LG G4’s ‘restarting itself’ problem
Step 4- Connect your P6 to the computer in order to mount its memory. USB cable should the medium for this connection.
Step 5- Copy and paste the SuperUS file to the memory of your SD card. It is important for you to remember that the file should be directly placed in the SD card memory and not in any of the folders. The exact name of the SuperSu file is SuperSU-v2.82-201612051815.zip.
Step 6- Switch off your mobile phone.
If you haven’t download TWRP 220.127.116.11 angler.img on your PC, you should do it right away. Make sure that you save it in the adroid-sdk-window\platform-tools directory of your system. If case TWPR recovery does not work, you can try out the CWM recovery.
Step 7- Restart your phone by pressing and hold the power up key along with the volume down key for a few seconds. This will boot your phone into the fastboot mode.
Step 8- Open a command prompt from the platforms tools directory by pressing the shift key and right clicking on the empty space. To go to platform-tool is located in the android-sdk-windows directory.
Step 9- Now write the following command :fastboot flash recovery twrp-18.104.22.168-angler.img
Step 10- After you are done with this, you need to enter the recovery mode by selecting RECOVERY from the fastboot menu.
Step 11- Select “flash the zip from SD card” option when you are in the TWRP recovery mode. To make the selection you have to press the power key and to navigate you use the volume buttons.
Step 12- Choose the zip from sd card and to do so, you need to press the power button again
Look for the SuperSU-v2.82-201612051815.zip and select it. To start the installation, just confirm the process on the next screen.
You may also read: How to Root Your Huawei P10 and Huawei P10 Plus
Step 13- Once the installation is done, root your phone via the reboot system now option. But first you need to go to “+++++Go Back, only then will you be able to see the above option. If you are rooting your phone for the first time, it is going to take about 5 minutes. So, you need to be patient.
You are done, you just rooted your Nexus P6 with Android 7.1.2 N2G47W Nougat Official Firmware.