SHARE

In this article, we are going to explain to our readers and easy and a comprehensive way of Installing TWRP and Root Essential PH-1 With Magisk. Essential PH-1 is an amazing phone, the phone comes packed with numerous features. If you want a phone that has everything to offer, we believe that Essential PH-1 should be your choice. The phone was launched a couple of months back, although it came out later than expected, yet it seems the wait for worth it.

The phone did have few tumbles along the road as well as some mixed reactions from people. Some were happy with what they got whereas other criticized. But it seems that the recent cut in the prices has reinvigorated the interest in the Essential phone. We already know that to enjoy the phone to its full potential we need to root the phone, now thanks to bmg 10001, we have the method to the PH-1 smartphone.

You may also read: How to Root and Install TWRP on Huawei Honor V9 Running EMUI 8.0, Android Oreo 8.0

Note: It is important to note that this tutorial is only for Essential PH-1, we strongly suggest that you do not try it on any other mobile phone. Please check the model number of the device before proceeding. If the model number is the same as in the article, only then should you go ahead.

Sumiq

Warning: If something goes wrong during the installation process, our blog is not going to take any responsibility. If you want to install TWRP or Root your PH-1, please proceed at your own risk.

Pre-requisites

Before we get down to the installation process, there are a couple of things that you either have to perform or download.

  1. First and foremost, you need to create a backup of your phone. There is a possibility that you might end up wipe clean your phone during the installation process. Or you something goes wrong and you lose all your data.
  2. It is imperative that you enable the USB Debugging Mode on your Essential PH-1. You can enable the mode by going to Settings and then to Developer Options.
  3. Don’t forget to install Essential PH-1 USB Drivers on your computer. This is an important step, so don’t miss it out.

Required Files

You may also read: Root Samsung Galaxy A3 A320F to XXU2BQI3 Android 7.0 Nougat Firmare

The Complete Guide: How to Install TWRP and Root Essential PH-1 With Magisk

Step 1: The first thing that you need to do is launch the ADB command on the interface of your computer.

Step 2: Now you need to connect your phone to your computer using a USB cable.

Step 3: If this is the first time you are doing this, you will get a pop up on your phone. It will ask for USB debugging permission. You allow it in order to proceed forward.

Step 4: Now enter the command below and hit Enter. The command will reboot your phone into fastboot mode.

adb reboot bootloader

Step 5: Another way to boot your phone into the fastboot mode is by first powering it off and then pressing and holding the power button along with the volume button at the same time.

Step 6: Once in the fastboot mode, you then have to type the following command.

fastboot flash recovery twrp.img

Step 7: Once all the flashing is done, you will have to boot your phone into the Recovery Mode.

Step 8: Download the Magisk 14.3 zip file, and then you need to transfer it to your phone using a USB connection.

Step 9: In the TWRP Mode, select Instal option and then select the Magisk Zip file. To flash it you need to swipe it.

Step 10: Head back to TWRP main page, now select Reboot>Bootloader.

Step 11: Once your phone is back in the fastboot mode, you then have to flash the following command with the appropriate boot image respective to your phone.

fastboot flash boot boot.img.

Step 12: Disconnect your phone and reboot it. You are done now, you have rooted your phone with Magisk.

You may also read: How to Root Galaxy Note 8 SM-N950U (Snapdragon) with SamFAIL

 

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.